TQC Dolly Drill

Dolly Drill for Pull-off Adhesion Test

The TQC Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly.

Manually removing the access of glue and cutting through the coating is a hard job for inspectors that have to do many tests a day, which results in wrist and arm pains. The TQC Dolly Drill eases their work considerably, and increases the accuracy of the pull off adhesion tests because of a perfect vertical cutting movement down to the metal.

For the best reproducible results use the Adhesion tester AT, with the hydraulics and auto positioning feature of the pull-off head.

TQC Master Paint Plate

Multifunctional Test Kit

The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features:

1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according TS-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross,
wet film thickness gauge from 50 up to 160 microns,
edge grind checker for correct roundness of edges,
wet film applicator ranging from 0 to 180 µm
levelling test providing an indication of the viscosity of the coating.

Delivery includes cutting tool and tape.

Tape for Adhesion Test

Tapes used in Cross-Cut Adhesion Test

TQC offers several different types of adhesive tapes for different Test norms.

TQC offers several different types of adhesive tapes for different Test norms. The tapes can be used with CC1000,CC2000,CC3000,SuperPIG and Master Paint Plate.

Positest-AT

Pull-off Adhesion Tester

The PosiTest AT Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates.

The Positest AT-A is equipped with an electronically controlled hydraulic pump and measures according to ISO4624 and ASTM D 4541.

The unit is equipped with a self aligning quick coupling which secures the dollies tight.

The Pull-off adhesion Tests are performed by a simple press on the button. Preset values like psi or MPa, Dollie size, adhesion force according international test methods and storing results into memory.

Big display with Hold function for indication of max. values.

Evaluating measured values on PC is possible by using an adapter and PC-software.

Manual Version Positest AT-M has an hydraulic pump designed to apply smooth and continuous pressure with a single stroke. It has a Pull Rate Indicator to manually monitor and adjust the rate of pull.