MFFT- Minimum Film Forming Temperature

Minimum Film Formation Temperature Tester


Temperature gradient plate for determining minimum film forming temperature test. The minimum film forming temperature is the lowest temperature at which an emulsion, latex or adhesive will uniformly coalesce when applied on a substrate as a thin film.

Knowing the MFFT temperature allows formulators to create a product that cures correctly under the required application conditions. The instrument can also be used to define the white point/glass transition temperature of dispersion materials, synthetic resins, enamels etc. and the blocking power and stacking capability of coated papers, foils, prints...

TQC MFFT TTEST is a sophisticated test instrument with a ground hard-chrome plated metal platen as to deposit the specimen. By heating and cooling the platen any variable temperature gradient within the range of -30 to +250 °C can be produced and kept constant for any given period. The platen is equipped with 10 or 20 evenly spread temperature sensors. The temperature is controlled through an integrated digital controller with a digital display and measuring-point selector that covers the whole range.To define the MFFT the specimen is applied on the platen with a film-applicator and protected from ambient conditions through a transparent cover in which a flow of dried air is created to prevent condensation and to assure repeatability. To determine the blocking power the specimens on the platen are weighed by defined loads to simulate the stacking capability.

Down to -30°C

TQC MFFT Testers can determine the minimum film forming temperature below 0°C. Test temperatures down to -30°C is possible.

Reproducable results

Excellent repeatability and reproducability with precision sensors and dry air flow system to prevent condensation and icing

Conforms Standards:

TQC MFFT conforms
TS EN ISO 2115, – DIN 53366 – ASTM D 2354 – ASTM D 1465 – ISO/DIS 4622

Order Id
>MFFT10, Minimum Film Forming Temperature Bar
10 built-in temperature sensors
Temperature gradient: max. 20 K (depends on the external cryostat)
Hinged transparent cover made of PMMA, max. working temperature 80°C
MFFT20, Minimum Film Forming Temperature Bar
20 built-in temperature sensors
temperature gradient: max. 100 K (depends on the external cryostat)
Hinged transparent cover made of PMMA, for temperatures up to +80°C
Hinged transparent cover made of stainless steel and safety glass for temperatures up to +250°C.
Low Temperature bath for TQC MFFT 20.
Low Temperature bath for TQC MFFT 10
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok