RM100 Plus

Rheomat RM100 Plus

Rotational Viscometer acc. to
TS 5833 EN ISO 3219
(Determination of viscosity using a rotational viscometer with defined shear rate)
TS 6126 EN ISO 2555
(Determination of apparent viscosity by the brookfield test method)
TS EN ISO 2884-1 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
TS 5809 - ASTM D 562 Krebs-Stormer (KU) method

RM100 Plus high speed viscometer is designed for "real viscosity" measurements under high shear rates according to ISO 3219 (DIN11-22-33). Due to its modular design, the instrument is also capable to work with different measuring systems including ASTM D 562 / TS 5809 (Krebs-Stormer), ASTM / ISO 2555 (RV), "MS-R1 to 5" or "MS-BV 1-1000". Together with EVA-CP Temperature Control Stand, the unit can also be used as an ICI Cone & Plate Viskometer. RM100 has a maximum speed of 1500rpm which allows creating shear rates more than 10.000 s-1 depending on the measurement geometry.

Its modern springless technology and sturdy design ensures undeniable reliability. The RM100 PLUS has a 7” touch screen and comes with a stylus. This easy-to-use screen lets you see all measurement parameters at the same time. Unlike other Krebs viscometers which can only measure up to 141KU which is defined in old ASTM D 562 standard, RM 100 Plus has a wide torque range which makes it also capable of Krebs-Stormer measurements of the high viscosity paints without switching other measuring system or spindle. With extrapolation of the standard KU curve, measurements up to 250 KU is possible.

RM 100 Plus has a integrated temperature sensor and it is delivered with a laboratory stand but without measuring system. Required measuring system or systems shall be ordered individually.

RM100 Plus, also has a LR Version which allows higher accuracy for determination of the appearent viscosity of low viscosity liquids. Instruments come with a calibration certificate.

One Instrument
Multi Measuring System

Lamy Viscometers designed and manufactured to run with different measuring systems. The RM100 PLUS is capable of measuring both appearent viscosity measurement acc. to ISO2555, ISO3219, ISO2884-1 ICI Cone & Plate and MS-BV1-1000 measuring systems as well as KU measurements acc. to ASTM 562 - TS 5809 Krebs-Stormer Method used in paint industry.

Springless Design

Lamy Viscometers does not contain any spring for torque measurements. This innovative design allows measurements without being effected by the ambient temperature and also avoids the necessity of precise leveling of the instrument. RM100 Touch is designed for tough industrial enviroments as well as fine laboratory conditions.

Kinematic Viscosity Measurements

Lamy Viscometers allows product density input making the kinematic viscosity measurements possible. Devices lets you set measuring times for thixotropic products.

RM100 Plus Specifications
Type of Instrument:
Rotational viscometer for ISO3219, ASTM/ISO2555, BV1-1000, MS-R, Cone & Plate or KU measuring systems
Speed Range:
Unlimited number of speeds between 0.3 and 1500 rpm
Torque Range:
Standard Version : 0,05 to 30 mNm
LR Version : 0,005 to 0.8 mNm
Accuracy:
± 1 % of the full scale
Repeatability:
± 0,2%
Viscosity Range:
1-540.000.000 mPa·s
With KU System: 40-~250KU
Temperature:
By PT100 sensor, from -50 to 300 °C
Display:
7" Touch Screen
Display Settings:
Viscosity | Temperature | Speed | Torque | Time | Measuring geometry | Level of sensitivity | Date/ hour | Choice of viscosity units: cP or mPa·s | Language: French/English
Security and Confidentiality:
An "operator" function allows you to enter a username for your instrument. This user must then be identified using a 4-digit code. There is also a protected mode that locks your measurement conditions.
Supply Voltage:
90-240 VAC 50/60 Hz
Analog Output:
4 – 20 mA | Torque range to be defined by user
PC Connections:
RS232 Port and USB
Printer Connection:
USB Host Port
Additional features:
You can connect a USB printer. External control thanks to the optional VISCO RM software.
Carry Case:
Optional
Dimensions and Weight:
Head: L180 x W135 x H250 mm
Hardened steel stand: L280 x W200 x H30 mm
Stainless steel rod: 500 mm
Weight: 6.7 kg
Order Id
Description
T100000
RM100 Plus Viscometer
with easy mount bayonet coupling
without measuring system
T100115
RM100 Plus Viscometer
with easy mount AC115 coupling
without measuring system
T100265
RM100 Plus Viscometer
with easy mount AC265 coupling
without measuring system
T100120
RM100 Plus Viscometer
with measuring system MS-R 2-3-4 in case
T100200
RM100 Plus CP2000 Cone & Plate Viscometer
With CP1 temperature control stand (5 to 80°C) and one selected cone spindle
T100220
RM100 Plus CP2000H Cone & Plate Viscometer
With CP1H high temperature control stand (ambiant to 300°C) and one selected cone spindle
T102000
RM100 Plus Viscometer
with measuring system MS-R 1-2-3-4-5 in case
Measuring Systems

Stainless steel discs measuring system for relative viscosity measurements in a 600-ml beaker. This system is used for measurements in accordance with the ASTM-ISO 2555 standard.

It is supplied as standard on the Black One (MS 2 to 7) and can also be used with the Rheomat First RM, RM 100 and RM 200.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
111008
Axis L-R
Adaptations axis
-

111000
Axis R 1-6
Threaded axis
-

111001
R-1 Disc
Ø56,26
600mL
3-450.000 mPa.s

111002
R-2 Disc
Ø46,93
600mL
15-1.750.000 mPa.s

111003
R-3 Disc
Ø34,69
600mL
30-4.400.000 mPa.s

111004
R-4 Disc
Ø27,30
600mL
60-8.800.000 mPa.s

111005
R-5 Disc
Ø21,14
600mL
120-17.600.000 mPa.s

111006
R-6 Disc
Ø14,62
600mL
1000-156.000.000 mPa.s

111007
R-7 Disc
Ø3,20
600mL
260-42.600.000 mPa.s

111010
L-1 Spindle
Ø18,80 x 65,1
600mL
15 - 20.000 mPa.s

111011
L-2 Spindle
Ø18,72 x 6,86
600mL
50 - 100.000 mPa.s

111012
L-3 Spindle
Ø12,60 x 1,78
600mL
200 - 400.000 mPa.s

111013
L-4 Spindle
Ø3,20
600mL
15 - 20.000 mPa.s

This measuring system is widely used in coating industry to determine the viscosity of paints, varnishes and other coatings in grams or Kreps-Unit (KU) in accordance with ASTM D562.

Together with viscometer B-One Touch or First RM Toch, standard range of 40-141KU is measurable while with high torque range of RM100 allows you to measure the products with viscosities up to ~250KU. To measure the viscosities of putties and pastes, a low torque "paste spindle" is also available for all BO, First RM and RM100.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
111100
KU 1-10 Spindle
Ø53,98mm
500mL
40 - 141(250)KU

111103
MK-75 Y Paste Spindle
Ø42,88 mm
500mL
100 - 50.000 mPa.s

Coaxial cylinder measuring system according to the DIN / ISO 3219 standard. Each component: bob, tube and cap can be bought and used separately, depending on using or product requirements.

MS-DIN measuring systems could be thermostated with thermostatisation cell DIN / ISO 3219 or EVA MS-DIN. It can be used with the First Touch, RM 100 Touch and RM 200 Touch.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
112820
MK - DIN 1
Ø30mm
-
3 - 1.000.000 mPa.s

112821
MK - DIN 2
Ø24mm
-
10 - 5.400.000 mPa.s

112822
MK - DIN 3
Ø14mm
-
50 - 42.000.000 mPa.s

111875
MK - DIN 9
Ø31,5mm
-
1 - 350.000 mPa.s

112932
DIN 1 Tube
Ø32,5mm
15-25ml
-

112937
DIN 2 Tube
Ø26mm
12-18ml
-

112938
DIN 3 Tube
Ø15mm
5-10ml
-

112933
DIN 1 S Tube
Ø32,5mm
15-25ml
-

112948
DIN 2 S Tube
Ø26mm
12-18ml
-

112944
DIN 3 S Tube
Ø15mm
5-10ml
-

112872
DIN 1 Cap
-
-
-

112877
DIN 2 Cap
-
-
-

112878
DIN 3 Cap
-
-
-

Stainless steel discs measuring system for viscosity measurements in a 150 ml Beaker. This system allows rapid and economical measurements.

This system could be used by First Touch and can also be used with the Rheomat RM 100 Touch & RM 200 Touch

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
117000
MS-BV 1-1000
Measuring System
complete with carrying case
-

117102
BV 1-100 Axis
Threaded axis for BV discs
-

117202
BV-CD
BV centring device
-

117001
BV Disc n°1
Ø 45
120ml
2 - 500.000 mPas

117010
BV Disc n°10
Ø40
120ml
50-5.000.000 mPa.s

117100
BV Disc n°100
Ø20
120ml
200-45.000.000 mPa.s

117101
BV 1000 Axis
Ø4
120ml
2.000-510.000.000 mPa.s

117150
150ml glass beaker
Ø50-52
150
-

118001
MS TI Tube
Ø50
150ml
-

Paddle measuring system. It was already fitted to the TV EPPRECHT type viscometers,and has been recognised as the standard for numerous viscosity measurements in the cosmetic and paint industries. It is also perfectly suited for measuring the viscosity of heterogeneous products, or fluids containing lumps, for example, in the food and beverage or mineral chemistry industries.

TV Epprecht MS-R 1-5 measuring system can be thermostated via EVA MS-R Constant Temperature Stand whic can accommodate 2 instruments allowing you to fully optimise your workspace. This measuring system is compatible with Rheomat RM100 Touch and RM200 Touch.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
111949
MS-BV 1-1000
Measuring System
complete with carrying case
-

114437
N°1 centring disk
Centering disk for MB-1 cup
-

114436
ST-R centring device
Centering device for MB-1, 2, 3 cups
-

114308
MB-1 Cup
Ø 98
320ml
-

114311
MB-2 Cup
Ø 54
40ml
-

114314
MB-3 Cup
Ø 36
25ml
-

114425
MK-R1
W 93
-
1-40 mPa.s

114426
MK-R2
W 46
-
40-700 mPa.s

114427
MK-R3
W 23
-
300-4.000.000 mPa.s

114428
MK-R4
W 20
-
2.500-24.000.000 mPa.s

114429
MK-R5
Ø 5
-
10.000-510.000.000 mPa.s

This measuring system is used in foods , sealants and cosmetics to provide information on yield behaviour at low rotational rates.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
120017
Vane 72
Ø 21,67mm
L 43,38mm
-
50 - 500.000mPa.s

111108
Vane 73
Ø 12,67mm
W 25,35mm
-
250 - 25.000.000 mPa.s

111115
Vane 74
Ø 5,89mm
W 11,76mm
-
2.500 - 250.000.000 mPa.s

111105
MK 6 Blades
W 22
-
100 - 20.000.000 mPa.s

This measuring system owns two coaxial cylinders and it could be determine easily the dynamic viscosity and the yield value at 300 and 600 rpm, according A.P.I. standard, on drilling fluids, it could be also measure the "gel" value at 3 rpm.

Fann Measuring System is compatible with RM 100 Touch and RHEOMAT RM 200 Touch and also the portable viscometer RM 100 P Touch.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
119002
FANN MB-R1B1
Ø 36,80
20ml
-

119001
FANN MK-R1B1
Ø 34,49
-
300-800.000 mPa.s

This coaxial cylindrical measuring system was one of the first to granted OICCC certification in 1970 to check chocolate rheology using the Casson method.

It continues to be the most universal measuring system for very fluid couverture chocolate to more viscous “block” type products and fillings.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
116002
MK-C
Ø 13,60
-
50-17.000.000 mPa.s

112932
DIN 1 tube
Ø 32,5
-
Viscous chocolates

116004
C insert
Ø 20
20 ml
Viscous chocolates

116005
Delrin cap
-
-
-

111985
Eva 100
Thermostatisation cell by Peltier Effect for C cup

Cone & Plate measuring system consists of a conical spindle on a thermostated plate which is perfectly adapted to rheological control on small volume of sample and to the quick change of temperature. From 5°C to 300°C range different type of themostatic plate stands are avaiable.

Cone & plate measuring system is also ideal for viscosity measurement of high viscosity products under high shear rates. Melting viscosity determination of the powder coatings is another aplication field of the Cone & Plate System

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
422005
MK-CP 2005
Ø 20mm / 0,5°
0,018
40-2.000.000 mPa.s

422020
MK-CP 2020
Ø 20 mm / 2°
0,075
100-8.000.000 mPa.s

422445
MK-CP 2445
Ø 24 mm / 0,45°
0,030ml
20-2.000.000 mPa.s

424005
MK-CP 4005
Ø 40 mm / 0,5°
0,150ml
20-300.000 mPa.s

424020
MK-CP 4020
Ø 40 mm / 2°
0,60ml
15-1.000.000 mPa.s

RT-3 Measuring System is designed for viscosity measurements at high temperatures up to 300°C. Either runs with MB-B, C or D spindles in disposable aluminium cups or with cone spindles on heated plate as a ICI Cone/Plate system together with high temperature electric oven stand: RT-3.

RT-3 High Temperature Viscosity Measuring system provides thermostating from room temperature up to 300°C It can be used with the First Touch, RM 100 Touch and RM 200 Touch.

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
112570
MK-RT II B
Ø30mm
-
10 - 5.500.000 mPa.s

112572
MK-RT II C
Ø13,60mm
-
50 - 27.500.000 mPa.s

112573
MK-RT II D
Ø7,50mm
-
2.000 - 500.000.000 mPa.s

114318
MB-B Aluminium Cup
Batch of 100
70ml
-

114306
MB-C Aluminium Cup
Batch of 100
20ml
-

114319
MB-D Aluminium Cup
Batch of 100
8ml
-

112611
B Ring
-
-
-

112612
C Insert
-
-
-

112614
D Insert
-
-
-

112613
KP Insert
Ø15mm
5-10ml
-

312020
KP RT 2020 Cone
Ø 20 / 2°
0,075ml
100 - 8.000.000 mPa.s

315020
KP RT 5020 Cone
Ø 50 / 2°
1,14ml
100 - 8.000.000 mPa.s

Associated to RM300 speed imposed rheometer, those measuring systems using small sample volumes, assure rheological measurement in a greater type of applications. Systems includes coaxial bob/pipe or Spindles for "Cone & Plate" system both according to DIN / ISO 3219. Each Component: spindle, cylinder pipe or cap can be individually supplied due to measurement or product requirements.

Measuring System is compatible with discontinued models like Rheomat RM115, RM260 or RM300 as well as AC115 socket type universal speed imposed rheometer "Rheomat RM200 TOUCH".

Order Id
Item
Dimensions
Volume
Viscosity Range
Image
112524
MB-C Cup
Ø20mm
20mL
-

112509
MB-DIN 108T Cup
Ø8,50mm
2mL
-

112510
MB-DIN 114T Cup
Ø15mm
5mL
-

112511
MB-DIN 125T Cup
Ø27,5mm
20mL
-

112512
MB-DIN 145T Cup
Ø48,5mm
100ml
-

112701
MS-0 Cup
Ø50mm
20ml
-

112525
MK-C
Ø13,60mm
-
50 - 50.000.000 mPa.s

112550
MK-C2
Ø17,60mm
-
20 - 20.000.000 mPa.s

112552
MK-C4
Ø19mm
-
2 - 900.000 mPa.s

432005
MK-CP 2005
Ø 20 & 0,5°
0,018ml
40 - 3.000.000 mPa.s

432020
MK-CP 2020
Ø 20 & 2°
0,075mL
100 - 13.000.000 mPa.s

434020
MK-CP 4020
Ø 40 & 2°
0,60mL
15 - 1.500.000 mPa.s

435005
MK-CP 5005
Ø 50 & 0,5°
0,30mL
3 - 250.000 mPa.s

435020
MK-CP 5020
Ø 50 & 2°
1,15mL
10 - 1.000.000 mPa.s

112501
MK-DIN 108
Ø8mm
-
80 - 150.000.000 mPa.s

112502
MK-DIN 114
Ø14mm
-
15 - 30.000.000 mPa.s

112503
MK-DIN 125
Ø25mm
-
5 - 5.000.000 mPa.s

112504
MK-DIN 145
Ø45mm
-
3 - 900.000 mPa.s

112702
MK-MS0
Ø46,5mm
-
1 - 28.000 mPa.s
EVA Temperature Control Stands

Thermostated unit by Peltier Effect for coaxial systems without circulating fluid.

Ideal for rheological measurement that needs fast Temperature changes.

Use your FIRST TOUCH, RM100 TOUCH or RM200 TOUCH in conjunction with eva ms-din to achieve thermostatic measurement results of your samples.

EVA-DIN Specifications
Device:
Temperature control system by PELTIER effect for the MS-DIN ISO 3219 measuring system
Temperature:
12 to 65 °C +/- 0.2 °C
Display:
Setup and real temperature of the EVA system
Supply voltage:
90-240 VAC 50/60 Hz
Other detail:
EVA MS-DIN could be associated to FIRST RM Touch, RM 100 Touch and RM 200 Touch.
Order Id
Description
T950000
EVA MS-DIN ISO 3219 NEW DESIGN + 12° to +65° C

Thermostated unit by Peltier Effect for anchor type systems without circulating fluid.

Ideal for rheological measurement that needs fast Temperature changes. The EVA MS-R system can accommodate 2 instruments, allowing you to fully optimise your workspace. With the EVA MS-R system, you have the option of having 9 samples on the Peltier thermostated plate.

Use your RM100 TOUCH or RM200 TOUCH in conjunction with EVA MS-R to achieve thermostatic measurement results of your samples.

EVA MS-R Specifications
Device:
Temperature control system by PELTIER effect for the MB-2 and MB-3 measuring cup
Temperature:
17 to 45 °C +/- 0.2 °C
Display:
Setup and real temperature of the EVA system
Supply voltage:
90-240 VAC 50/60 Hz
Other detail:
EVA MS-R could be associated to RM 100 Touch and RM 200 Touch.
Order Id
Description
T950200
EVA MS-R (9 holes) New Design +17° to +45° C

Thermostated unit by Peltier Effect for 600 ml Becher used in ASTM / ISO 2555 (Determination of apparent viscosity by the Brookfield Test method) Standard Viscosity measurement.

Ideal to control and adjust the Temperature of samples contained in 600 Becher imposed in ASTM / ISO 2555 Standard viscosity measurement. This system is quick to heat or cool the vessel and it don't used any fluid.

EVA MS-ASTM/ISO2555 could be associated to FIRST TOUCH , RM 100 TOUCH and RM 200 TOUCH.

EVA MS-LR Specifications
Device:
Thermostating plate by Peltier Effect for 600ml becher used in ASTM / ISO 2555
Temperature:
15 to 45 °C +/- 0.2 °C
Display:
Setup and real temperature of the EVA system
Supply voltage:
90-240 VAC 50/60 Hz
Dimensions & Weight:
L300 x W490 x H570 mm | Weight: 15 kg
Order Id
Description
T950006
EVA MS-LR New Design +15° to +45° C

Low cost electrical oven for viscosity measurements at high temperatures. The temperature range of RT-1 is from ambiant temperature to 300°C. It uses coaxial geometries standardised according DIN/ISO 3219 ans also aluminium disposable cups geometry MS-C.

The RT-1 high-temperature oven can accommodate your FIRST Touch, RM100 Touch or RM200 Touch.

RT-1 Specifications
Device:
Electric oven for measuring geometries MS-DIN, MS-C, and MS-C with disposable cups
Temperature:
Room temperature to 300 °C +/- 0.2°C
Display:
Setup and real temperature of the RT1 system
Supply voltage:
90-240 VAC 50/60 Hz
Dimensions & Weight:
Box L140 x W260 x H120 mm | Oven Diameter 180 mm x Height 220 mm | Weight: 16 kg
Order Id
Description
130110
RT-1 Oven 300°C

This stand, thermostated by Peltier Effect works from 5 to 80°C without circulating fluid and from -20°C to 120°C when it is associated to a circulating bath (CP1 Fluid).

It enables rheological measurement on very small quantity of sample and heat and cool very quickly for rapid measurements. Its stable up and down arm assure a perfect positioning of cone in sample.

CP1 standı FIRST Touch, RM100 Touch ya da RM200 Touch viskometreleri ve reometreleriyle kullanılabilir.

CP-1 Specifications
Device:
Cone-Plate stand with temperature control by Peltier effect without circulating fluid
Temperature:
From 5 to 80°C +/- 0,2 °C with Peltier Air-Air Peltier Liquid Option: from -20 to 120 °C depending on the temperature of the connected bath (not included)
Display:
Setup and real temperature of the CP1 system
Supply voltage:
90-240 VAC 50/60 Hz
Dimensions & Weight:
L300 x W490 x H570 mm | Weight: 16 kg
Order Id
Description
401000
CP-1 Cone & Plate Peltier Stand / +5 to +80°C
402000
CP-1A Cone & Plate Peltier Stand with Fluid Circulation / -20 to +120°C

Special Thermostating Oven Stand for viscosity measurements.It is using aluminium disposable cups, MB-B, C or D, and cone-plate geometries from ambient to 300°C. It could be associated with an inside programmer to realise ramp or steps of temperature automatically.

Pair your FIRST Touch, RM100 Touch or RM200 Touch to the RT-3 high temperature oven and carry out your measurements with precision.

RT-3 Specifications
Device:
Electric oven for measuring geometries MS-RT II B, C or D with disposable cups or Cone-Plate Geometries
Temperature:
Room temperature to 300 °C +/- 0.2°C
Display:
Setup and real temperature of the EVA system
Supply voltage:
90-240 VAC 50/60 Hz
Dimensions & Weight:
Box L140 x W260 x H120 mm | Stand: L240 x W284 x H655 mm | Weight: 20 kg
Order Id
Description
320000
RT-3 High Temperature Oven Stand 300° C
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.