TQC AUTOMATIC FILM APPLICATOR STANDARD
Film Application with maximum reproducebility
The TQC Automatic film applicator provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors. Variations in speed, pressure and direction of draw down cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the TQC Automatic film applicator these variable factors are being stabilised. Over the complete surface the film thickness is even. Samples created with the TQC Automatic film applicator are reproducible. It’s possible to produce a large number of identical laboratory precision draw downs in a short period of time. The quality of the applied film is important for research on rheological properties of the applied media. To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the TQC Automatic film applicator is a must have. Multiple types of automatic film applicators are available for either glass/paper/metal substrates or foils. All models can be used in combination with either standard block type film applicators such as bird/baker models, or spiral bar type film applicators (wire wound rod type) depending on the configuration chosen.
Standards: ASTM D823
Increased stroke length
Up to 415 mm. in order to coat larger panel such as scrub test panels as used in ASTM D 2486, ASTM D 4213, ISO 11998 and other scrub test methods.
Increased Bed Length
Bed length has been increased up to 520 mm without significant effect on the outer dimensions of the product.
New Application Orientation
From left to right instead of from back to front
New, motor-driven, automatic chart clamp
To secure and release test charts automatically thus speeding up workflow and enhancing ergonomics.
More choices of vacuum areas
Besides A3 and A4 sizes the new TQC automatic film applicator also accept A5 and ASTM D2486 scrub panels to be set digitally without the need to tape down open holes.
Triple i operating interface
Intuitive operating by means of a completely new designed Triple i operating interface: Intelligent Illumination Indicator; just those keys that are active are illuminated on the 4.3” full colour screen
Yüksek Kapasiteli Bellek
Kullanıcıya özel ayarlamaları kaydetmek ve böylelikle zaman kaybının ve hataların önüne geçmek için daha yüksek kapasiteli bellek.
Güçlendirilmiş Bağlantı
Klavye, mouse ve benzeri yardımcılar için USB girişi.
Where To Apply?
PAINT
Research & Developent
Paint research & development laboratories use compact film applicators to produce consistent test-charts for research after different formulations. Parameters such as opacity, spreading rate , colour and hiding power etc. needs to evaluated at controlled film thickness.
RAW MATERIALS
Define
Manufacturers of raw materials for the paint & coating industry such as binders, pigments, additives, colourants, solvents and resins need reproducible sample charts in order to define the effect of their products in a paint formulation in their R&D laboratory.
BATTERY
Research & Developent
The industry is anxiously searching for better and environmental friendly batteries. Thin film technology plays and important role in this research. Automatic film applicators are used by these laboratories to apply thin films such as electrolyte of thin metal sheets.
COSMETICS
Create reproducible samples
Create reproducible samples measure the properties of cosmetics and skincare products such as hardness, break strength, consistency , compaction strength, hiding power and opacity, spread ability, stickiness , drying and curing time, colour, gloss etc..
ADHESIVES
Manufacturers
Both in R&D and QC of the adhesive industry test samples with an accurate film thickness are crucial in order to define and guarantee the functionality and strength of the adhesive materials.Details
- Traverse Speed: 0.1 – 500 mm/s
- Traverse Speed Accuracy: +/- 1% Of Set Speed
- Stroke Length: 50 – 415 mm / 1.97 – 16.34 in
- Stroke Length Accuracy: +/- 2 mm / 0.08 in
- Max. Test Chart Size: 515 x 300 mm / 20.28 x 11.81 in
- Max. Test Chart Thickness: 9 mm / 0.35 in
- Max. Test Substrate Thickness: 35 mm / 1.38 in Incl. Coating
- Max. Vacuum Area: Din A3 / Scrub
- Automatic Vacuum Area: Din A5, Din A4, Din A3, Scrub
- Wire Bar Spiral Area: Max. 325 mm / 12.8 in
- Min. Wire Bar Length: 345 mm / 13.58 in
- Max. Wire Bar Diameter: 10 mm / 0.39 In At Fixation Points
- Width Other Applications: Maks. 300 mm / 11.81 in
- Height Other Film Applicators: 10 – 80 mm / 0.39 – 3.15 in
- Dimensions: 490x640x290 mm / 19.92x25.2x11.42 in
- Mass: 33 kg
- Power: 100 – 240 vac / 50 – 60 hz
- Power Consumption: Maks. 50 Watt
- Display: 480 x 272 Pixel Tft Display
- Controls: 5-key Navigation Switch, Mouse And Keyboard Optional