Testex Roughness Test Tape

Testex Replica Tape - Press O-Film

Replica tape for measuring the roughness of blasted surfaces

Replica tape for measuring blasted surface profiles. By placing the Tqc replica tape on the surface and rubbing over it, the Rt (total roughness) or peak-to-valley height of the profile can be taken and then measured with a film thickness meter.

1. TQC Replica tape consists of a layer of compressible foam affixed to an incompressible polyester substrate.
2. When pressed against a roughened/gritblasted (steel) surface, the foam collapses acquiring an impression of the surface.
3.Placing the compressed tape between the anvils of the SP1570 micrometric thickness gage, and subtracting the contribution of the incompressible substrate (50 micrometers or 0.002 inches), gives a measure of the surface profile.

One box of Testex contains tape for 50 measurements.

Order Id
TQC Testex-tape Medium,
range: 5-7 microinch / 0.1-2µm
Not to be used with a film thickness meter
TQC Testex-tape coarse Minus,
range: 0.5 to 1.0 mils/ 12 to 25 µm
TQC Testex-tape COARSE,
range: 0.8 to 2.5 mils / 20 to 64 µm
TQC Testex-tape X-COARSE,
range:1.5 to 4.5 mils / 38 to 115 µm
TQC Testex-tape X-coarse Plus,
range: 4.6 to 5.0 mils / 116 to 127 µm
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok