Cross-Cut Test Kit

TQC CC2000

Cross-Cut Adhesion Test Kit

The TQC Cross Cut Adhesion Test KIT CC2000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.

The cutting knife of the TQC Cross Cut Adhesion Test CC2000 is easy to exchange without the use of extra tools. The self positioning knife bracket of the TQC Cross Cut Adhesion Test CC2000 ensures equal pressure on the cutting knife.

Each TQC Cross Cut Adhesion Test KIT CC2000 contains a grip with cutter, a brush, an illuminated loupe and a roll of adhesive tape acc. EN ISO 2409.

Ürün Kodu

Açıklama

SP1690

TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 1 mm, acc. to EN ISO
For use on coatings up to 60 µm on hard substrates.

SP1691

TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 2 mm, acc. to EN ISO
For use on coatings up to 60 µm on soft substrates and coatings from 61 to 120 µm on both hard and soft substrates.

SP1692

TQC Cross Cut Adhesion Test CC2000, 6 blades, cutting distance 3 mm, acc. to EN ISO
For use on coatings from 121 µm to 250 µm on both hard and soft substrates.

SP1699

TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1 mm, acc. to ASTM
For use on coatings up to 50 µm.

SP1700

TQC Cross Cut Adhesion Test CC2000, 11 blades, cutting distance 1.5 mm, acc. to ASTM
For use on coatings from 50 to 125 µm.