Film Thickness

Foil Thickness Gauge

FTG 2000

The TQC Film thickness gauge is a high precision film and foil thickness gauge, especially developed for measuring so-called "replica tapes" as Testex®, used mainly to measure the surface profile.

The large clear display makes it easy to read the measurement under all conditions. Values can be displayed in either microns or inches.

To minimise the influence of body/hand temperature the gauge is mounted detached from the holder.

The TQC film thickness gauge operates completely according to "ISO 8503-5 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - part 5: Replica tape method for the determination of the surface profile."

As described in this standard the closing force is 1,5 N. The gauge has to have an accuracy of 5 micron and a resolution of 1 micron. The TQC Film thickness gauge is supplied in a hardcase.

Ürün Kodu

Açıklama

SP1570

The TQC Film thickness gauge
Range: 0-1000 Micron
Resolution: 1 Micron
Accuracy: ± 5 Micron
Battery:1,5V Type SR44

TQC PowderTAG Thickness Analysing Gauge

PowderTAG measures powder coating thickness before and after cure, non-contact and non-destructive.

Pdf Datasheet User Manual Video

A sophisticated combination of specific powder-, infrared- and photo-thermal techniques measures the thickness of powder coatings in pre-cured and cured status, precise and reproducible.

Save on powder consumption!
Save on rework and reject!
Improve efficiency
Improve quality

PowderTAG is a non-contact production tool, developed for use at the paint-line. Because the PowderTAG’s pulse does not need to be perpendicular, and has a small measuring spot, the PowderTAG is very suitable to accurately determine the layer thickness on small, curved or hard to reach objects. Even on wire frames or small corners and edges. A LED pointer assists in determining the correct distance and location.

Due to the non-contact measuring principle parts can be tested on a slow moving line without damaging the coating. For higher line speeds it is recommended to remove the part of the line via a bypass or stop the line.

Order Id

Description

LD5850

TQC PowderTAG Thickness Analysing Gauge

Surfix Pro X

Premium Dry Film Thickness Gauge with External Probe

Pdf Datasheet Pdf Probe Datasheet

Surfix Pro X is the new premium dry film thickness gauge of Phynix. In addition to all specifications to Surfix Pro S, this new device has a high resolution color display and Bluetooth 4,0 and USB 2,0 connection interface with an extended memory for 50.000 measurements.

A wide range of interchangeable probes provides many options for universal as well as special measurement tasks. It includes one of the world’s smallest measuring sensors which guarantees reliable measurements even on difficult geometries.

F-type probes operates only with the magnetic method (TS 2311 EN ISO 2178) to measure the coating thickness on ferrous substrates like steel and iron, N-types probes measures only with the eddy current method (TS 2674 EN ISO 2360) in order to measure on non-ferrous surfaces like aluminium, brass, zinc, etc. FN-type probes operates both with magnetic method and the eddy current method to ensure operation on all kind of metals.

Another application field where Surfix Pro X can be used is the tyre and conveyor belt industries. With specially designed probes for measurements on steel mesh, it is used for measurement of the rubber layer on the different parts of a tyre as well as the conveyor belts for quality control, wear tests and measuring of rubber thickness e.g. in evaluation of accident tyres.

Surfix® Pro-S is ideal for speedy, non-destructive and exceptionally precise Coating Thickness Measurement measurement:

in paintshops and for electroplaters
for wet and powder coating operations
in the automobile/automobile parts industry
for incoming material inspection, during production and for final inspection procedures
in development engineering and expert assessment
in tyre industry
in laboratory and field operations.

Order Id

Descriptions

11134

Phynix Surfix Pro X
Dry Film Thickness Gauge (without probe - probe needs to be ordered seperately)
Range: 0-30.000 µm (depending on the selected probe)
Resolution: 0.1 µm or <0.2% of measurement(depending on the selected probe)
Accuracy: ± 0,7µm / 3µm (depending on the selected probe)
Calibration: Factory Calibration + Zero Calibration + Foil Calibration + offset-function: add. or subtract. of a constant value
Memory: 50.000 measurements + Statistics (N, Avg, Std. Dev., Min, Max)

10845

Probe FN 0,2
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-200 µm
Accuracy: ± 0,7µm + 1% of reading

P10749

Probe FN 1,5
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10925

Probe FN 1,5 with acid resistant pole
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10949

Probe FN 1,5 R
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10751

Probe FN 1,5/90°
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10750

Probe FN 3,5
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-3.500 µm
Accuracy: ± 2µm + 1% of reading

P10752

Probe F 1,5
For measuring on Fe (steel/iron) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10950

Probe F 1,5 R
For measuring on Fe (steel/iron) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10753

Probe F 3,5
For measuring on Fe (steel/iron) metals
Range: 0-3.500 µm
Accuracy: ± 2µm + 1% of reading

P10754

Probe F 10
For measuring on Fe (steel/iron) metals
Range: 0-10.000 µm
Accuracy: ± 3µm + 1% of reading

P10755

Probe N 1,5
For measuring on NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10926

Probe N 1,5 with acid-resistant pole
For measuring on NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

11002

Prob F30T
Probe for measurement of the rubber thickness on the running surface up to the steel mesh and of the under-tread thickness in the grooves of the tread. Only for measurements on car tyres with steel mesh.
Range: Running surface: 0-30 mm / undertread: 2-10mm
Accuracy: ± (0.2 mm + 3 %)

11006

Prob F10-1
Probe for measurement of rubber thickness on car tyres. Only for measurements on car tyres with steel mesh.
Range: 0-6,5mm
Accuracy: ± (0.1 mm + 3 %)

11007

Prob F10-2
Probe for measurement of the rubber thickness inside beneath the tread up to the steel mesh.
Range: 0-6,5mm
Accuracy: ± (0.1 mm + 3 %)

11008

Prob F10-3
Probe for the measurement of rubber thickness on the bead up to the steel mesh.
Range: 0-6,5mm
Accuracy: ± (0.05 mm + 3 %)

11060

Prob F10-CP
Probe for measurement of total rubber thickness of the side wall with fabric carcass.
Range: 0-10mm
Accuracy: ± 0,01mm + 3%

11008

Prob F30-C
Probe for measuring the rubber thickness on the track and support side of steel cord conveyor belts. Particularly suitable for easy measurement without time-consuming interruption of the conveyor operation.
Range: 0-20mm
Accuracy: ± 0,2mm + 3%

Positector 200

Ultrasonic Coating Thickness Gauge

Pdf Brochure User Manual Video

The Defelsko Positector 200 measures non-destructively a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites and more. Advanced models measure up to 3 individual layer thicknesses in a multi-layer system and features a graphic readout for detailed analysis of the coating system.
Conforms to ASTM D6132 and ISO 2808.

All Gauges include probe, precision plastic shims, protective rubber holster with belt clip, couplant, 3 AAA batteries, instructions, nylon carrying case with shoulder strap, Certificate of Calibration traceable to NIST.

Ürün Kodu

Açıklama

LD0210

Coating thickness gauge for non-metal substrates, PosiTector 200 B1 standard thickness gauge
Measures total thickness
Without graphic display
Typical applications: polymer coatings on wood, plastic etc.
Range (polymer coatings): 13 - 1000 microns; 0,5 - 40 mils
Accuracy: +/- (2microns = 3% of reading); +/- 0,1 mils + 3% of reading)

LD0211

Coating thickness gauge for non-metal substrates, PosiTector 200 B3 advanced thickness gauge
Measures total thickness and individual layers
With graphic display
Typical applications: polymer coatings on wood, plastic etc.
Range (polymer coatings): 13 - 1000 microns; 0,5 - 40 mils
Accuracy: +/- (2microns = 3% of reading); +/- 0,1 mils + 3% of reading)
Minimum individual layer thickness*: 13 microns; 0,5 mils
* For multiple layer applications only. Dependent on material being measured

LD0212

Coating thickness gauge for non-metal substrates, PosiTector 200 C1 standard thickness gauge
Measures total thickness
Without graphic display
Typical applications: thicker coatings on concrete, fiberglass, etc.
Range (polymer coatings): 50 - 3800 microns; 2 - 150 mils
Accuracy: +/- (2microns = 3% of reading); +/- 0,1 mils + 3% of reading)

LD0213

Coating thickness gauge for non-metal substrates, PosiTector 200 C3 advanced thickness gauge
Measures total thickness and individual layers
With graphic display
Typical applications: thicker coatings on concrete, fiberglass, etc.
Range (polymer coatings): 50 - 3800 microns; 2 - 150 mils
Accuracy: +/- (2microns = 3% of reading); +/- 0,1 mils + 3% of reading)
Minimum individual layer thickness*: 50 microns; 2 mils
* For multiple layer applications only. Dependent on material being measured

LD0214

Coating thickness gauge for non-metal substrates, PosiTector 200 D1 standard thickness gauge
Measures total thickness
Without graphic display
Typical applications: thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers, etc.
Range: 50 - 7600 microns; 2 - 300 mils
Accuracy: +/- (20microns = 3% of reading); +/- 1 mils + 3% of reading)

LD0215

Coating thickness gauge for non-metal substrates, PosiTector 200 C3 advanced thickness gauge
Measures total thickness and individual layers
With graphic display
Typical applications: thick, soft coatings like polyurea, asphaltic neoprene, very thick polymers, etc.
Range: 50 - 7600 microns; 2 - 300 mils
Accuracy: +/- (20microns = 3% of reading); +/- 1 mils + 3% of reading)
Minimum individual layer thickness*: 500 microns; 20 mils
* For multiple layer applications only. Dependent on material being measured.

Surfix S

Dry film Thickness Gauge with Interchangable External Probes

Pdf Datasheet Pdf Probe Datasheet

The Surfix® S portable coating thickness gauge with its exchangeable probes is designed for fast, practical and precise Coating Thickness Measurement. Depending on the selected probe, it can be used for all types of varnish, paint and electroplated coatings on iron and steel as well as varnish, paint and anodising coatings on non-ferrous metals and on austenitic stainless steels.

Surfix-S has three different types: Standard ,Pro and Basic. When used with a FN probe, all three types has a substrate recognition function which makes the Fe / NFe selection fully automatic right after positioning the probe on the surface, which also can be set manually. Standard types provides also statistical data (N, Avg, Std. Dev., Min, Max) over a number of measurements. Statistical data can be transferred to PC over IR Interface for documentation.

Surfix Pro-S also provides statistical data (N, Avg, Std. Dev., Min, Max) up to 10000 measurements in max. 250 nameable batch files. Statistical data can be transferred to PC over IR or RS 232 interface for documentation. Optional Software Prosoft is also available. It also allows 2 foil calibration in order to produce most accurate measurements.

Surfix® Pro-S is ideal for speedy, non-destructive and exceptionally precise Coating Thickness Measurement measurement:

in paintshops and for electroplaters
for wet and powder coating operations
in the automobile/automobile parts industry
for incoming material inspection, during production and for final inspection procedures
in development engineering and expert assessment
in laboratory and field operations.

Order Id

Description

10748

Phynix Surfix S
Dry Film Thickness Gauge (without probe - probe needs to be ordered seperately)
Range: 0-30.000 µm (depending on the selected probe)
Resolution: 0.1 µm or <0.2% of measurement(depending on the selected probe)
Accuracy: ± 0,7µm / 3µm (depending on the selected probe)
Calibration: Factory Calibration + Zero Calibration + Foil Calibration + offset-function: add. or subtract. of a constant value
Memory: 200 measurements + Statistics (N, Avg, Std. Dev., Min, Max)

10845

Phynix Surfix S Basic
Dry Film Thickness Gauge (without probe - probe needs to be ordered seperately)
Range: 0-30.000 µm (depending on the selected probe)
Resolution: 0.1 µm or <0.2% of measurement(depending on the selected probe)
Accuracy: ± 0,7µm / 3µm (depending on the selected probe)
Calibration: Factory Calibration + Zero Calibration + Foil Calibration + offset-function: add. or subtract. of a constant value
Memory: Yok

10757

Phynix Surfix Pro S
Dry Film Thickness Gauge (without probe - probe needs to be ordered seperately)
Range: 0-30.000 µm (depending on the selected probe)
Resolution: 0.1 µm or <0.2% of measurement(depending on the selected probe)
Accuracy: ± 0,7µm / 3µm (depending on the selected probe)
Calibration: Factory Calibration + Zero Calibration + 1 Foil Calibration + 2 Foil Calibration + offset-function: add. or subtract. of a constant value
Memory: 10.000 measurements in 250 batches + Statistics (N, Avg, Std. Dev., Min, Max)

10845

Probe FN 0,2
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-200 µm
Accuracy: ± 0,7µm + 1% of reading

P10749

Probe FN 1,5
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10925

Probe FN 1,5 with acid resistant pole
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10949

Probe FN 1,5 R
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10751

Probe FN 1,5/90°
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10750

Probe FN 3,5
For measuring on Fe (steel/iron) and NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-3.500 µm
Accuracy: ± 2µm + 1% of reading

P10752

Probe F 1,5
For measuring on Fe (steel/iron) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10950

Probe F 1,5 R
For measuring on Fe (steel/iron) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10753

Probe F 3,5
For measuring on Fe (steel/iron) metals
Range: 0-3.500 µm
Accuracy: ± 2µm + 1% of reading

P10754

Probe F 10
For measuring on Fe (steel/iron) metals
Range: 0-10.000 µm
Accuracy: ± 3µm + 1% of reading

P10755

Probe N 1,5
For measuring on NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading

P10926

Probe N 1,5 with acid-resistant pole
For measuring on NFe (Aluminium, Brass, Zinc Etc.) metals
Range: 0-1.500 µm
Accuracy: ± 1µm + 1% of reading