Size daha iyi hizmet verebilmek için sitemizde çerezlere yer veriyoruz. Sitemizi kullandığınız sürece Gizlilik ve Çerez Politikamızı kabul etmektesiniz.

Resiflow FL 2

Resiflow FL 2 is a silicone free, polymeric flow control agent and resin modifier used as additive to correct imperfections in coatings and printing ink formulations.

Craters, pin holes and fisheyes may be eliminated or substantially reduced by incorporating 0.2 - 2.0% of the agent into total formulation. The initial and recoating adhesion is normally not affected by addition of Resiflow FL 2. Resiflow FL 2 is stable to UV-radiation. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane resins and other systems

Resiflow FL 2 is designed for powder coatings, solvent based coatings, high solids, coil coatings and UV-coatings. Printing inks based on flexographic or silk screen have also shown improved characteristics. A small addition of Resiflow FL 2 into vinyl organosols and polyester gel coats improves their performance.

In powder coating applications best results are obtained when the flow control agent is used as master batch consisting of 90 - 95% resin and 5 - 10% Resiflow FL 2.

The compatibility of powder coatings containing different flow control agents could be critical. Therefore we recommend corresponding preliminary trials.

Technical Data
colourless, high viscous liquid
Non volatile content, 1h/125 °C, DIN EN ISO 3251
min. 98%
Viscosity, 20 °C, delivery form, DIN 53015, ball 6
30 - 50 Paּs
Density, 20 °C, DIN EN ISO 2811-1
approx. 1.0 g/cm³

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.