Taber Aşındırıcısı - Rotary Abraser

Taber Aşındırıcısı - Rotary Abraser

Döner tekerlekli Taber deneyi ile aşınma dayanımı tayini

Taber Aşındırma Test Cihazı malzemelerin sürtünme, ovma ya da erozyon gibi mekanik bir aşındırıcı etkiye karşı bağıl dayanımlarını belirlemek için kullanılan bir test aygıtıdır.

Taber Rotary Abraser, Aşındırıcısı, parkeler, metaller, deri, tekstil eşyaları, kauçuk, boyalı ve vernikli yüzeyler, halılar, ve zemin kaplamaları gibi ürünlerin aşınma ve zamana karşı dayanıklılık testlerinde endüstri standardıdır.

Tek kafalı ve 2 kafalı olmak üzere 2 modeli mevcuttur. Taber Rotary Aşındırma Cihazı ile standard olarak 6,35mm'ye kadar kalınlıkta 10x10cm kare ya da Ø10cm ebatlarında diskler test edilebilir. 6,35mm ila 40mm arasındaki numuneler ise opsiyonel aksesuarlar gerektirir.

Taber Aşınma Cihazı aşağıdaki uluslararası normlarla uyumludur: EN 438-2 • EN 660-2 • EN 13329:E • EN 13672 • EN 13696 • EN 14431 • EN 14864 • EN ISO 5470-1 • ASTM D1044 • ASTM D3389 • ASTM D3730 • ASTM D3884 • ASTM D4060 • ASTM D4685 • ASTM D4712 • ASTM D5146 • ASTM D5324 • ASTM D6037 • ASTM D7255 • ASTM F362 • ASTM F510 • ASTM F1478 • BS 3900 • DIN 52347 • DIN 53109 • DIN 53754 • DIN 53799 • DIN 68861 T2 • ISO 7784-2 • ISO 9352 • TAPPI T476 • NEN 1857 • ...

Ürün Kodu
Açıklama
985135-1
Model 5135, Single Head Abraser Set (115/230V, 60/50 Hz), incl.:
• Vacuum System (with suction hose, round brush & filter)
• Auxiliary Weight - 500 gram load (each) (2pcs)
• Auxiliary Weight - 1000 gram load (each) (2pcs)
• Calibrase® Wheel Set (CS-10) (1 Çift)
• Calibrade® Wheel Set (H-18) (1 Çift)
• Refacing Discs, 100 pcs. (S-11) (1 paket)
• Specimen Mounting Cards, 10 pc. Sample Pack (S-36) (1 paket)
• Specimen Holder (E-100-125) & Hold Down Ring (E-100-101) (1 pc)
• Hex Wrench (1 pc)
• Hand Brush (S-12) (1 pc)
• Power Cord Kit (1 pc)
• Operating Instructions (1 pc)
985155-1
Model 5155, Dual Head Abraser Set (115/230V, 60/50 Hz), incl.:
• Vacuum System (with suction hose, round brush & filter)
• Auxiliary Weight - 500 gram load (each) (4pcs)
• Auxiliary Weight - 1000 gram load (each) (4pcs)
• Calibrase® Wheel Set (CS-10) (2 Çift)
• Calibrade® Wheel Set (H-18) (2 Çift)
• Refacing Discs, 100 pcs. (S-11) (1 paket)
• Specimen Mounting Cards, 10 pc. Sample Pack (S-36) (1 paket)
• Specimen Holder (E-100-125) & Hold Down Ring (E-100-101) (2 pc)
• Hex Wrench (1 pc)
• Hand Brush (S-12) (1 pc)
• Power Cord Kit (1 pc)
• Operating Instructions (1 pc)
135177
CS-8 Calibrase Wheel Set (resilient) – purple [extra fine abrasive]
125321
CS-10F Calibrase Wheel Set (resilient) – brown [fine abrasive]
125320
CS-10 Calibrase Wheel Set (resilient) – green [medium abrasive]
125322
CS-17 Calibrase Wheel Set (resilient) – green [coarse abrasive]
132684
CS-10P Calibrase Wheel Set (resilient) – green [medium abrasive]
130950
CS-10W Calibrase Wheel Set (resilient) – white [medium abrasive]
132661
CS-T3 Calibrase Wheel Set (resilient) – red [fine abrasive]
132684
CS-10P Calibrase Wheel Set (resilient) – green [medium abrasive]
130950
CS-10W Calibrase Wheel Set (resilient) – white [medium abrasive]
125323
H-10 Calibrade Wheel Set (non-resilient) – gray [fine abrasive]
125324
H-18 Calibrade Wheel Set (non-resilient) – gray [med. abrasive]
125325
H-22 Calibrade Wheel Set (non-resilient) – gray [coarse abrasive]
125326
H-38 Calibrade Wheel Set (non-resilient) – tan [very fine abrasive]
125324
H-18 Calibrade Wheel Set (non-resilient) – gray [med. abrasive]
125325
H-22 Calibrade Wheel Set (non-resilient) – gray [coarse abrasive]
121124A
S-33 Sandpaper Strips - fine (coated abrasive backed with pressure sensitive adhesive), 100 pcs.
132495
S-33 Sandpaper Strips - fine (coated abrasive backed with pressure sensitive adhesive), 500 pcs.
125564A
S-42 Sandpaper Strips – medium (coated abrasive backed with pressure sensitive adhesive), 100 pcs.
132403A
S-42 Sandpaper Strips – medium (coated abrasive backed with pressure sensitive adhesive), 500 pcs.
125344
CS-0 (S-32) Rubber Wheel Set (resilient) – black [no abrasive]
125319
CS-5 Felt Wheel Set (resilient) – white [no abrasive]
125345
S-35 Tungsten Carbide Wheel Set [aggressive cutting / tearing]
125529
S-39 Leather Wheel Set [leather strip mounted to brass hub]
132720
Aluminum Wheel Set
121102
S-11 Refacing Discs (4” diameter, 150 grit abrasive paper), 100 pc.
134640
ST-11 Fine Refacing Stone (4” diameter x ¼” thick with ¼” hole, FINE - both sides 180 grit)
980250
250 Wheel Refacer [for use with all Rotary Abrasers]
120947
S133-60 Single Point Diamond Tool for Wheel Refacer, 3/8” – 24 thread (for 980250 after s/n 20101293, and 980200-10)
125608
200-62 Multiple Point Diamond Tool for Wheel Refacer, 3/8” – 24 thread (for 980250 after s/n 20041462 and 980200-10)